Instalirao sam Debian na laptop i super radi LXDE na 64 MB RAM-a, medjutim imam problem s xrandr. Naime, nece da mi prihvati novu rezoluciju. Evo sta mi izbaci:
Rezolucija je max 1024x768x16@60
P.S. Zna li neko gdje mogu vidjeti koje mi sve dependencije trebaju za XFCE? Imaju u pool-u 4.3.90 i 4.4 verzije, jer 4.6. sam probao i sporo radi, dakle treba vise RAM-a za njega.
Pa jesi li ukucao tu grešku u google? Ima milion hitova sa korisnim savjetima.
jesam, ali niko konkretno nije rijesio problem. Jedino mi jos pada na pamet da natjeram rezoluciju da se “primi” preko Xorg -configure. Navodno nije prepoznao tip monitora. Inace debian+lxde radi super na ovoj krntiji sa 64 mb ram, da mi je jos nekako provjeriti koliko prostora jos imam slobodno, posto bih htio instalirati xfce 4.3.90 iz debian poola i gst pluginove (2 GB je HDD i 150 MB sam uzeo za swapa)
Pošalji:
BTW po onome što sam mogao pročitati --newmode komanda je trebala odraditi što treba bez obzira na error. Prema tome nastavi sa --addmode komandom pa sa --mode komandom pa prijavi da li to ispiše još nekih grešaka osim gamma.
xrandr
[code]root@debian:/home/dino# cvt 1024 768
Modeline “1024x768_60.00” 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
root@debian:/home/dino# xrandr --newmode “1024x768_60.00” 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
xrandr: Failed to get size of gamma for output default
root@debian:/home/dino# xrandr --addmode default 1024x768_60.00
xrandr: Failed to get size of gamma for output default
root@debian:/home/dino# xrandr --output default --mode 1024x768_60.00
xrandr: Failed to get size of gamma for output default
xrandr: screen cannot be larger than 800x600 (desired size 1024x768)
root@debian:/home/dino# xrandr --newmode “1024x768_60.00” 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
xrandr: Failed to get size of gamma for output default
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 149 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 19
Current serial number in output stream: 19[/code]
lspci
root@debian:/home/dino/Desktop# lspci | grep VGA
00:04.0 VGA compatible controller: Trident Microsystems Cyber 9525 (rev 49)
Xorg.0.log
[code]X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
Current Operating System: Linux debian 2.6.32-5-686 #1 SMP Mon Oct 3 04:15:24 UTC 2011 i686
Kernel command line: auto BOOT_IMAGE=Linux ro root=802
Build Date: 19 February 2011 02:37:36PM
xorg-server 2:1.7.7-13 (Cyril Brulebois kibi@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Fri Nov 18 10:06:39 2011
(==) Using config file: “/etc/X11/xorg.conf”
(==) Using system config directory “/usr/share/X11/xorg.conf.d”
(==) ServerLayout “X.org Configured”
() |–>Screen “Screen0” (0)
() | |–>Monitor “Monitor0”
() | |–>Device “Card0”
() |–>Input Device “Mouse0”
() |–>Input Device “Keyboard0”
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
Entry deleted from font path.
() FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
() ModulePath set to “/usr/lib/xorg/modules”
(WW) AllowEmptyInput is on, devices using drivers ‘kbd’, ‘mouse’ or ‘vmmouse’ will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(–) PCI:*(0:0:4:0) 1023:9525:1179:0002 Trident Microsystems Cyber 9525 rev 73, Mem @ 0xff800000/4194304, 0xff7e0000/131072, 0xff000000/4194304, BIOS @ 0x???/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) “extmod” will be loaded. This was enabled by default and also specified in the config file.
(II) “dbe” will be loaded. This was enabled by default and also specified in the config file.
(II) “glx” will be loaded. This was enabled by default and also specified in the config file.
(II) “record” will be loaded. This was enabled by default and also specified in the config file.
(II) “dri” will be loaded. This was enabled by default and also specified in the config file.
(II) “dri2” will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dri2”
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “trident”
(II) Loading /usr/lib/xorg/modules/drivers/trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.3.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
cyberbladeAi1d, bladeXP, cyberbladeXPAi1, cyberbladeXP4, XP5
(II) Primary Device is: PCI 00@00:04:0
(WW) Falling back to old probe method for trident
(–) Chipset cyber9525dvd found
(==) TRIDENT(0): Depth 24, (–) framebuffer bpp 32
(II) Loading sub module “vgahw”
(II) LoadModule: “vgahw”
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”
(II) Module “ramdac” already built-in
(==) TRIDENT(0): RGB weight 888
(==) TRIDENT(0): Default visual is TrueColor
(==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) TRIDENT(0): Using XAA for acceleration
(==) TRIDENT(0): Linear framebuffer at 0xFF800000
(–) TRIDENT(0): IO registers at 0xFF7E0000
(II) Loading sub module “vbe”
(II) LoadModule: “vbe”
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module “int10”
(II) LoadModule: “int10”
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) TRIDENT(0): initializing int10
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(II) TRIDENT(0): VESA BIOS detected
(II) TRIDENT(0): VESA VBE Version 2.0
(II) TRIDENT(0): VESA VBE Total Mem: 2560 kB
(II) TRIDENT(0): VESA VBE OEM: Copyright 1997 TRIDENT MICROSYSTEMS INC.
(II) TRIDENT(0): VESA VBE OEM Software Rev: 0.0
(II) TRIDENT(0): VESA VBE OEM Vendor:
(II) TRIDENT(0): VESA VBE OEM Product:
(II) TRIDENT(0): VESA VBE OEM Product Rev:
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Module “ddc” already built-in
(II) TRIDENT(0): VESA VBE DDC supported
(II) TRIDENT(0): VESA VBE DDC Level 2
(II) TRIDENT(0): VESA VBE DDC transfer in appr. 1 sec.
f000:6b07: 01 ILLEGAL EXTENDED X86 OPCODE!
(II) TRIDENT(0): VESA VBE DDC invalid
(–) TRIDENT(0): Revision is 65
(–) TRIDENT(0): Found Cyber 9525/DVD chip
(–) TRIDENT(0): RAM type is SGRAM
(–) TRIDENT(0): Using HW cursor
(–) TRIDENT(0): VideoRAM: 2560 kByte
(–) TRIDENT(0): TFT Panel 1024x768 found
(–) TRIDENT(0): Memory Clock is 100.00 MHz
(==) TRIDENT(0): Min pixel clock is 12 MHz
(–) TRIDENT(0): Max pixel clock is 115 MHz
(II) TRIDENT(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) TRIDENT(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(WW) TRIDENT(0): Unable to estimate virtual size
(II) TRIDENT(0): Clock range: 12.00 to 115.00 MHz
(II) TRIDENT(0): Not using mode “1024x768_60.00” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “640x350” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “320x175” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “640x400” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “320x200” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “720x400” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “360x200” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “640x480” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “320x240” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “640x480” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “320x240” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “640x480” (hsync out of range)
(II) TRIDENT(0): Not using default mode “320x240” (hsync out of range)
(II) TRIDENT(0): Not using default mode “800x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “400x300” (hsync out of range)
(II) TRIDENT(0): Not using default mode “800x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “400x300” (hsync out of range)
(II) TRIDENT(0): Not using default mode “800x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “400x300” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “512x384” (vrefresh out of range)
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “512x384” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “512x384” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “512x384” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “512x384” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1152x864” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “576x432” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1280x960” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “640x480” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1280x960” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “640x480” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1280x1024” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “640x512” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1280x1024” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “640x512” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1280x1024” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “640x512” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1600x1200” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “800x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1600x1200” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “800x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1600x1200” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “800x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1600x1200” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “800x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1600x1200” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “800x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1792x1344” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “896x672” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1792x1344” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “896x672” (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode “1856x1392” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “928x696” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1856x1392” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “928x696” (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode “1920x1440” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “960x720” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “1920x1440” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “960x720” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “832x624” (hsync out of range)
(II) TRIDENT(0): Not using default mode “416x312” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1152x864” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “576x432” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1152x864” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “576x432” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1152x864” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “576x432” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1152x864” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “576x432” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1152x864” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “576x432” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1152x864” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “576x432” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1360x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “680x384” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1360x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “680x384” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1400x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “700x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1400x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “700x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1400x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “700x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1400x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “700x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1440x900” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “720x450” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1600x1024” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “800x512” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1680x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “840x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1680x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “840x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1680x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “840x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1680x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “840x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1680x1050” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “840x525” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1920x1080” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “960x540” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1920x1200” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “960x600” (hsync out of range)
(II) TRIDENT(0): Not using default mode “1920x1440” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “960x720” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “2048x1536” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “2048x1536” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “2048x1536” (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)
(–) TRIDENT(0): Virtual size is 800x600 (pitch 800)
() TRIDENT(0): *Default mode “800x600”: 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) TRIDENT(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
() TRIDENT(0): *Default mode “800x600”: 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) TRIDENT(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
() TRIDENT(0): *Default mode “640x480”: 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) TRIDENT(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
() TRIDENT(0): *Default mode “400x300”: 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) TRIDENT(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
() TRIDENT(0): *Default mode “400x300”: 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) TRIDENT(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
() TRIDENT(0): *Default mode “320x240”: 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) TRIDENT(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) TRIDENT(0): DPI set to (96, 96)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module “i2c”
(II) LoadModule: “i2c”
(II) Module “i2c” already built-in
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Module “ddc” already built-in
(–) Depth 24 pixmap format is 32 bpp
(II) Loading sub module “int10”
(II) LoadModule: “int10”
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) TRIDENT(0): Initializing int10
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(II) TRIDENT(0): Using 219 scanlines of offscreen memory for area’s
(II) TRIDENT(0): Using 640 bytes of offscreen memory for linear (offset=0x27fd80)
(II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Scanline Image Writes
Setting up tile and stipple cache:
6 128x128 slots
(==) TRIDENT(0): Backing store disabled
(==) TRIDENT(0): Silken mouse enabled
(==) TRIDENT(0): DPMS enabled
(II) TRIDENT(0): Trident Video Flags:
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event2)
() Power Button: Applying InputClass “evdev keyboard catchall”
(II) LoadModule: “evdev”
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
() Power Button: always reports core events
() Power Button: Device: “/dev/input/event2”
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
() Option “xkb_rules” “evdev”
() Option “xkb_model” “pc105”
() Option “xkb_layout” “us”
(II) config/udev: Adding input device Video Bus (/dev/input/event4)
() Video Bus: Applying InputClass “evdev keyboard catchall”
() Video Bus: always reports core events
() Video Bus: Device: “/dev/input/event4”
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD)
() Option “xkb_rules” “evdev”
() Option “xkb_model” “pc105”
() Option “xkb_layout” “us”
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
() AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
() AT Translated Set 2 keyboard: always reports core events
() AT Translated Set 2 keyboard: Device: “/dev/input/event0”
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD)
() Option “xkb_rules” “evdev”
() Option “xkb_model” “pc105”
() Option “xkb_layout” “us”
(II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
() PS/2 Generic Mouse: Applying InputClass “evdev pointer catchall”
() PS/2 Generic Mouse: always reports core events
() PS/2 Generic Mouse: Device: “/dev/input/event6”
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found relative axes
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
() PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
() PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device “PS/2 Generic Mouse” (type: MOUSE)
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Toshiba input device (/dev/input/event5)
() Toshiba input device: Applying InputClass “evdev keyboard catchall”
() Toshiba input device: always reports core events
() Toshiba input device: Device: “/dev/input/event5”
(II) Toshiba input device: Found keys
(II) Toshiba input device: Configuring as keyboard
(II) XINPUT: Adding extended input device “Toshiba input device” (type: KEYBOARD)
() Option “xkb_rules” “evdev”
() Option “xkb_model” “pc105”
(**) Option “xkb_layout” “us”[/code]
xrandr mi govori da je max rezolucija 800x600. Probao sam s ubacivanjem Modeline i Modes u xorg.conf te DefaultDepth 16, ali nista. Sve isto. Probao sam s trident prebaciti na vesa ali samo sam dobio razmuljanu sliku. Inace osim debiana sam probao i slitaz, ali i kod njega ne mogu napraviti rezoluciju, pa sam odustao. Kod slackware sam to napravio s lakocom preko xorgconfig, ali razlog zasto ovo sve isprobavam je da stari Slackware do 12.x verzije nema hal i dbus. Sve USB stickove koje ustekam moram rucno mountovati i to je prilicna gnjavaza kad to cesto radis.
quote TRIDENT(0): VideoRAM: 2560 kByte
…
(II) TRIDENT(0): Not using default mode “1024x768” (insufficient memory for mode)[/quote]
A da probaš otići u BIOS i povećati količinu memorije dostupne za grafiku?
http://www.linuxquestions.org/questions/linux-laptop-and-netbook-25/full-screen-help-381569/
[quote]I fixed the problem by changing the horizontal an verticle sync lines to
VertRefresh 50.0 - 110
HorizSync 28.0 - 90.0[/quote]
Slično rješenje (sa drugim vrijednostima) je dato ovdje: http://forum.ubuntuusers.de/topic/aufloesung-nicht-hoeher-als-800x600-xorg.conf/
Ovo mi zvuci kao rjesenje. Hvala puno ovo cu probati. Ova dva lika imaju jako, jako slicne laptope kao kod mene, s tim sto je kod ovog prvog isti kao kod mene, jedino je razlika sto je kod mene CD ROM, kod njega DVD ROM.
Sto se tice memorije graficke, ne moze se mijenjati, jer nema takve opcije u biosu.
Da ne otvaram novu temu, uzeo sam PCMCIA wireless karticu za ovu Toshibu. Kartica pici na Windowsima, ali bih htio da uradim debian netinstall. Nakon sto instaliram base system na disk, interesuje me kako cu da konfigurisem ovu karticu preko komandne linije kako bih mogao svuci potrebne pakete. Znaci situacija je slijedeca: linux ne prepoznaje ovu karticu. Probao sam da ucitam prism2 orinoco driver, ali nista. Slitaz kaze sa iwconfig: no wireless devices, a lspci ocita PCMCIA portove ali ne i karticu koja je prikljucena na njega. Cuo sam za ndiswrapper, ali da li ga mogu koristiti u konzoli bez X-a? Nadam se da je neko imao slican slucaj.
Laptop je Toshiba 4090XCDT, 400 MHz Mendocino CPU, 64MB RAM i 2GB HDD, a PCMCIA kartica je T Sinus 111.
[quote=Reznor]Da ne otvaram novu temu, uzeo sam PCMCIA wireless karticu za ovu Toshibu. Kartica pici na Windowsima, ali bih htio da uradim debian netinstall. Nakon sto instaliram base system na disk, interesuje me kako cu da konfigurisem ovu karticu preko komandne linije kako bih mogao svuci potrebne pakete. Znaci situacija je slijedeca: linux ne prepoznaje ovu karticu. Probao sam da ucitam prism2 orinoco driver, ali nista. Slitaz kaze sa iwconfig: no wireless devices, a lspci ocita PCMCIA portove ali ne i karticu koja je prikljucena na njega. Cuo sam za ndiswrapper, ali da li ga mogu koristiti u konzoli bez X-a? Nadam se da je neko imao slican slucaj.
Laptop je Toshiba 4090XCDT, 400 MHz Mendocino CPU, 64MB RAM i 2GB HDD, a PCMCIA kartica je T Sinus 111.[/quote]
bila je nakad slična situacija
http://forum.linux.org.ba/viewtopic.php?id=6150&p=2
evo ti probaj ovo
Hvala ti nidla, a hvala i vedranu. Rezoluciju sam napravio, sve radi normala. Dakle, to je s linka na kome lik je dao HorizSync i VertRefresh za Toshibu 4090XDVD i to je bilo rjesenje problema. Sad mi radi i na Debianu i na Slitazu i rezolucija je konacno 1024x768.
Sad WLAN-kartica je prepoznata…izgleda. Snimio sam linux-wlan-ng, ndiswrapper, wireless-tools i network-manager. Instalaciju sam odradio s Sony Vaio laptopa koji ima LAN karticu, a debian mu prepozna i wireless, tako da je sve islo brzo i glatko. Snimio sam Xfce4, LXDE i openbox da se nadju, a za ne povjerovati - XFCE4 mi sada radi brze nego kada ga instaliram s CD-a sa LXDEom i XFCEom (varijanta CD1 s ovim DE-ima). Mozda je zato sto sam sad stavio swap. Ali nema veze, sada jos ostaje samo PCMCIA WLAN kartica.
Evo sta kaze iwconfig:
Ali kartica i dalje ne svijetli, tj ne svijetle Activity i PWR indikatori, dok se oni na XP-u pale na boot-u samog OS-a. No mozda tako i treba. Istaknem karticu: No wireless extensions. Utaknem opet i iwconfig i pokaze mi kao sa slike da je nasao karticu. Sta dalje? Molim za pomoc.
Edit: zamijenio sam network-manager sa wicd i on pocne nesto da trazi i kaze da nema nadjenih mreza. Ako snimim ts111nic.inf driver od XP-a kaze mi ndiswrapper invalid driver. Kartica je bazirana na prism2.5 cipu i u debian wiki je ima na listi.