Ima li ko zivaca da fino objasni? problem na suse 10 sa 330 ADSL-om

Pozdrav ljudi ev nemam drufgog rijesenja nego da vam objasnim problem pa ako ko moze rijesiti bio bih zahvalan :wink:
imam bihnetov USB speedtouch 330 ADSL modem i os SUSE 10 ali nema “boga” da ja njega nastimam i da se konektujem na net :roll:
mislim ima li ko da mi objasni step by step jer fakat sam blokirao i jedno vrijeme odustao ali et ipak da pitam za pomoc strucnih ljudi mogu li sta rijesiti.
unapred HVALA :wink:

Evo ovdje imas sve fino objasnjeno

http://steve-parker.org/speedtouchconf/

[code] The documentation is available at SpeedTouch.SourceForge.Net but this script just does that lot for you, so you shouldn’t need to bother reading documentation or understand anything about USB, PPP, or ADSL.

To use this script, you need to:

  1. Save the latest version of speedtouchconf.tar.gz, the script for configuring it all. The latest version is the first one listed on the page.
    This includes the speedtouch.sourceforge.net software.
    If you have problems with the latest version, try the last stable version (6th March 2005).
  2. Extract the files: tar xzvf speedtouchconf-dd-mm-yyyy.tar.gz
  3. Change into the speedtouchconf directory: cd speedtouchconf-dd-mm-yyyy
  4. Get the Microcode from Alcatel (now Thomson):
    * Visit The Alcatel Microcode Download Page
    (fill in your details, uncheck the “spam me” checkbox, click “Continue” and select the “Binary” download link)
    * Or copy the alcaudsl.sys file from your working Windows installation
    * Another firmware file is currently available from speedtouch.sourceforge.net which is apparently quite reliable, and doesn’t require you to enter any personal details.
    * For the silver modem, this firmware should be used. (The legality of this download is uncertain; the link may be disabled at any time).
    The Silver modem is now believed to work reliably - feedback appreciated. Just put the .ZIP file into the same directory as the speedtouchconf.sh script. Do not unzip it.
  5. Save the microcode (either speedmgmt.tar.gz, mgmt.o, alcaudsl.sys, or the .zip file) into the speedtouchconf-dd-mm-yyyy/ directory.
  6. ./speedtouchconf.sh

  7. This should run something like this example.[/code]

ee care hvala ev upravo se javljam sa linuxa
jos jednom TNX :mrgreen:

hmmm ev mislim da imam problem neki ok je sve konektovao sam se na net i kada resetujem komp. net nece da radi pokusao sam sto nudi u scripti auto boot up network ali nece
i svaki put moram instalirati ovo prethodno ili ako ga pozovem mislim pokusam upaliti ev sta mi javlja

linux:/home/eurostella # /etc/init.d/speedtouch start
Starting ADSL connection:FATAL: Module usb_ohci not found.
failed

hmm ima li ko rijesenje pls.

Probaj:

a ako ti izbaci neki error onda ti nedostaje taj module, znači ne gine ti rekompajlirat kernel:
http://start.linux.org.ba/Kernel

Ja sam na SuSE 10.0 imao taj problem sa skriptom speedtouchconf od 25. Novembra, problem je bio vezan za USB tako da sam instalirao verziju speedtouchconf od 16. Oktobra.Probaj tu verziju skinut i pokreni skriptu i kad se konektuje u /etc/speedtouch.conf promjeni LOAD_USBCORE i LOAD_USBINTERFACE na 0 tj. LOAD_USBCORE=0 i LOAD_USBINTERFACE=0 pa probaj onda resetovat pa vidi hoce li se startat

joj jesi ti meni skywalker sretan hehe upravu si stavio sam paket od oktobra i promi9jenio ovo OAD_USBCORE i LOAD_USBINTERFACE na 0 tj. LOAD_USBCORE=0 i LOAD_USBINTERFACE=0 i sada je sve ok
hvala jos jednom :mrgreen: