Evo ljudi izbacujem citav proces pravljenja pppoe konekcije.
Ima li ko kakvo rjeenje.
OKAY TO MODIFY
If you continue with this program, the configuration file
/etc/ppp/peers/dsl-provider will be modified. Please make sure
that you have a backup copy before saying Yes.
Continue with configuration? YES NO
POPULAR OPTIONS
Most people using popular dialup providers prefer the options
noauth’ and ‘defaultroute’ in their configuration and remove
the ‘nodetach’ option. Should I check your configuration file
and change these settings where neccessary?
YES NO
ENTER USERNAME
Please enter the username which you usually need for
the PPP login to your provider in the input box below.
If you wish to see the help screen, delete the
username and press OK.
OK
ENTER PASSWORD
Please enter the password which you usually need for
the PPP login to your provider in the input box below.
NOTE: you can see the password in plain text while
typing. OK
USE PEER DNS
You need at least one DNS IP address to resolve the
normal host names. Normally your provider sends you
addresses of useable servers when the connection is
established. Would you like to add these addresses
automatically to the list of nameservers in your local
/etc/resolv.conf file? (recommended)
<Yes> <No>
IMITED MSS PROBLEM
Many providers have routers that do not support TCP packets with
a MSS higher than 1460. Usually, outgoing packets have this MSS
when they go through one real Ethernet link with the default MTU
size (1500). Unfortunately, if you are forwarding packets from
other hosts (i.e. doing masquerading) the MSS may be increased
depending on the packet size and the route to the client hosts,
so your client machines won't be able to connect to some sites.
There is a solution: the maximum MSS can be limited by pppoe.
You can find more details about this issue in the pppoe
documentation.
Should pppoe clamp MSS at 1452 bytes?
If unsure, say yes.
(If you still get problems described above, try setting to 1412
<Yes> <No>
DONE
Your PPPD is configured now. Would you like to start
the connection at boot time?
YES NO
ESTABLISH A CONNECTION
Now, you can make a DSL connection with “pon
dsl-provider” and terminate it with “poff”. Would you
like to start the connection now?
CONNECTION INITIATED
The DSL connection has been triggered. You can use the
"plog" command to see the status or "ifconfig ppp0"
for general interface info.
U terminalu mi javlja:
oem@Tarik-Adna ~/Desktop $ ifconfig ppp0
ppp0: error fetching interface information: Device not found
