K3b mi nešto ne radi kako treba.
ale@mars:~# k3b
ale@mars:~# k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
To je prva greskica koja mi se pojavi. I prilikom snimanja javi mi sledeće:
[code]System
K3b Version: 0.12
KDE Version: 3.4.1
QT Version: 3.3.4
Kernel: 2.4.26
Devices
TEAC CD-W540E 1.0F (/dev/hdb, ) at /mnt/cdrom [CD-R; CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R96R]
K3b
Size of filesystem calculated: 36452
Used versions
mkisofs: 2.1
cdrecord: 2.1
cdrecord
scsidev: 'ATAPI:/dev/hdb’
devname: 'ATAPI:/dev/hdb’
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright © 1995-2004 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version ‘schily-0.8’.
Driveropts: 'burnfree’
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identifikation : 'CD-W540E '
Revision : '1.0F’
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 4127760 = 4031 KB
Drive DMA Speed: 2746 kB/s 15x CD 1x DVD
FIFO size : 4194304 = 4096 KB
Encoding speed : 39x (2855 sectors/s) for libedc from Heiko Eißfeldt
Track 01: data 71 MB
Total size: 81 MB (08:06.02) = 36452 sectors
Lout start: 82 MB (08:08/02) = 36452 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 323397
Starting to write CD/DVD at speed 4 in real RAW/RAW96R mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer … input buffer ready.
BURN-Free is ON.
Performing OPC…
/usr/bin/cdrecord: Input/output error. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 02 00 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x02 (power calibration area is full) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.083s timeout 60s
/usr/bin/cdrecord: OPC failed.
Writing time: 4.526s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
/usr/bin/cdrecord -v gracetime=2 dev=ATAPI:/dev/hdb speed=4 -raw96r driveropts=burnfree -eject -data -tsize=36452s -
mkisofs
36452
1.40% done, estimate finish Fri Oct 21 00:10:16 2005
2.76% done, estimate finish Fri Oct 21 00:08:30 2005
4.13% done, estimate finish Fri Oct 21 00:07:54 2005
mkisofs command:
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR © 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3b1YwTPa.tmp -rational-rock -hide-list /tmp/kde-root/k3bSTIhaa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bwwWZmb.tmp[/code]
Writing mode mi je na auto koji de postavim RAW, DAO, TAO??
Inače se radi o TEAC CD-W540E
